>> Touch test requested by Jonathan/Tom using evtest. >> M2 Porter GDP Genivi 9 RC1 with MULTITOUCH enabled in kernel with eChic touchscreen KOELSCH SPI_LOADER(DDR3L_1333) V0.16a 2014.10.03 DEVICE S25FL512 U-Boot 2013.01.01-gb653737-dirty (Mar 26 2015 - 14:37:46) CPU: Renesas Electronics R8A7791 rev 2.0 Board: Porter Board DRAM: 1 GiB MMC: sh-sdhi: 0, sh-sdhi: 1 SF: Detected S25FL512S with page size 256 KiB, total 64 MiB In: serial Out: serial Err: serial Net: sh_eth Hit any key to stop autoboot: 0 3386328 bytes read in 170 ms (19 MiB/s) 35964 bytes read in 8 ms (4.3 MiB/s) ## Booting kernel from Legacy Image at 40007fc0 ... Image Name: Linux-3.10.31-ltsi Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3386264 Bytes = 3.2 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 40f00000 Booting using the fdt blob at 0x40f00000 XIP Kernel Image ... OK OK Loading Device Tree to 40ef4000, end 40effc7b ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.31-ltsi (steve@be1yocto) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Wed Mar 30 17:58:06 BST 2016 CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=30c73c7d CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine: porter, model: Porter cma: CMA: reserved 256 MiB at 70000000 cma: CMA: reserved 256 MiB at 57000000 Memory policy: ECC disabled, Data cache writealloc PERCPU: Embedded 7 pages/cpu @c4f1d000 s8064 r8192 d12416 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523040 Kernel command line: console=ttySC6,38400 vmalloc=384M video=HDMI-A-1:1024x768-32@60 root=/dev/mmcblk0p1 rw rootfstype=ext3 rootdelay=3 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1024MB 1024MB = 2048MB total Memory: 1547808k/1547808k available, 549344k reserved, 1196032K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xe7800000 - 0xff000000 ( 376 MB) lowmem : 0xc0000000 - 0xe7000000 ( 624 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc064908c (6405 kB) .init : 0xc064a000 - 0xc0684f80 ( 236 kB) .data : 0xc0686000 - 0xc06c2860 ( 243 kB) .bss : 0xc06c2860 - 0xc06f8af4 ( 217 kB) Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. NR_IRQS:16 nr_irqs:16 16 Architected local timer running at 10.00MHz (virt). Switching to timer-based delay loop sched_clock: ARM arch timer >56 bits at 10000kHz, resolution 100ns sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0xc049d6d8 - 0xc049d730 CPU1: Booted secondary processor CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (40.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized pinctrl core: initialized pinctrl subsystem regulator-dummy: no parameters NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations renesas_irqc e61c0000.interrupt-controller: driving 10 irqs sh-pfc e6060000.pfc: r8a77910_pfc support registered No ATAGs? hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. bio: create slab at 0 gpio_rcar e6050000.gpio: driving 32 GPIOs gpio_rcar e6051000.gpio: driving 32 GPIOs gpio_rcar e6052000.gpio: driving 32 GPIOs gpio_rcar e6053000.gpio: driving 32 GPIOs gpio_rcar e6054000.gpio: driving 32 GPIOs gpio_rcar e6055000.gpio: driving 32 GPIOs gpio_rcar e6055400.gpio: driving 32 GPIOs gpio_rcar e6055800.gpio: driving 26 GPIOs SDHI0 Vcc: 3300 mV SDHI2 Vcc: 3300 mV SDHI0 VccQ: 1800 <--> 3300 mV at 3300 mV SDHI2 VccQ: 1800 <--> 3300 mV at 3300 mV SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c-sh_mobile e60b0000.i2c: I2C adapter 6 with bus speed 100000 Hz (L/H=0x1b/0x13) i2c-rcar e6518000.i2c: probed i2c-rcar e6530000.i2c: probed i2c-rcar e6520000.i2c: probed i2c-rcar e6528000.i2c: probed media: Linux media interface: v0.10 Linux video capture interface: v2.00 sh_cmt sh_cmt.0: used for clock events Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Switching to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 1199 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) unable to find transceiver platform pci-rcar-gen2.0: Driver pci-rcar-gen2 requests probe deferral unable to find transceiver platform pci-rcar-gen2.1: Driver pci-rcar-gen2 requests probe deferral rcar-pcie fe000000.pcie: PCIe link down DA9210: 1000 mV at 4600 mA Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled SuperH (H)SCI(F) driver initialized sh-sci.6: ttySC6 at MMIO 0xe6e60000 (irq = 184) is a scif console [ttySC6] enabled at24 2-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write scsi0 : sata_rcar ata1: SATA max UDMA/133 irq 137 m25p80 spi0.0: s25fl512s (65536 Kbytes) 3 ofpart partitions found on MTD device spi0.0 Creating 3 MTD partitions on "spi0.0": 0x000000000000-0x000000080000 : "loader" 0x000000080000-0x000000600000 : "user" 0x000000600000-0x000004000000 : "flash" renesas_spi e6b10000.spi: probed CAN device driver interface rcar_can e6e80000.can: device registered (reg_base=e78f2000, irq=218) libphy: sh_mii: probed sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:5b:33, IRQ 194. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver i2c-core: driver [adv7612] using legacy suspend method i2c-core: driver [adv7612] using legacy resume method i2c-core: driver [adv7180] using legacy suspend method i2c-core: driver [adv7180] using legacy resume method soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0 adv7180 2-0020: chip found @ 0x40 (e6530000.i2c) [drm] Initialized drm 1.1.0 20060810 rcar-du rcar-du-r8a7791: DU0 use VSPD0 rcar-du rcar-du-r8a7791: DU1 use VSPD1 Console: switching to colour frame buffer device 128x48 rcar-du rcar-du-r8a7791: fb0: frame buffer device ata1: link resume succeeded after 1 retries rcar-du rcar-du-r8a7791: registered panic notifier rcar-du rcar-du-r8a7791: CRTC[1] used by FBDev [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized rcar-du 1.0.0 20130110 on minor 0 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized sh_mobile_sdhi sdhi0: Got CD GPIO #806. sh_mobile_sdhi sdhi0: Got WP GPIO #807. ata1: SATA link down (SStatus 0 SControl 300) sh_mobile_sdhi sdhi0: mmc0 base at 0xee100000 clock rate 195 MHz sh_mobile_sdhi sdhi2: Got CD GPIO #822. sh_mobile_sdhi sdhi2: mmc1 base at 0xee160000 clock rate 97 MHz usbcore: registered new interface driver usbhid usbhid: USB HID core driver platform sound.6: Driver asoc-simple-card requests probe deferral mmc0: new ultra high speed SDR50 SDHC card at address aaaa rcar_sound ec500000.rcar_sound: probed TCP: cubic registered mmcblk0: mmc0:aaaa SL16G 14.8 GiB mmcblk0: p1 NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Key type dns_resolver registered VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 pci-rcar-gen2 pci-rcar-gen2.0: PCI: bus0 revision 11 pci-rcar-gen2 pci-rcar-gen2.0: PCI host bridge to bus 0003:00 pci_bus 0003:00: root bus resource [io 0xee080000-0xee08ffff] pci_bus 0003:00: root bus resource [mem 0xee080000-0xee08ffff] pci_bus 0003:00: No busn resource found for root bus, will use [bus 00-ff] PCI: bus0: Fast back to back transfers disabled PCI: Device 0003:00:01.0 not available because of resource collisions pci 0003:00:01.0: Can't enable PCI device, BIOS handoff failed. PCI: Device 0003:00:01.0 not available because of resource collisions pci 0003:00:01.0: Driver ohci_hcd requests probe deferral PCI: Device 0003:00:02.0 not available because of resource collisions pci 0003:00:02.0: Can't enable PCI device, BIOS handoff failed. PCI: Device 0003:00:02.0 not available because of resource collisions pci 0003:00:02.0: Driver ehci-pci requests probe deferral pci 0003:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff] pci 0003:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff] pci-rcar-gen2 pci-rcar-gen2.1: PCI: bus0 revision 11 pci-rcar-gen2 pci-rcar-gen2.1: PCI host bridge to bus 0004:01 pci_bus 0004:01: root bus resource [io 0xee0c0000-0xee0cffff] pci_bus 0004:01: root bus resource [mem 0xee0c0000-0xee0cffff] pci_bus 0004:01: No busn resource found for root bus, will use [bus 01-ff] PCI: bus1: Fast back to back transfers disabled PCI: Device 0004:01:01.0 not available because of resource collisions pci 0004:01:01.0: Can't enable PCI device, BIOS handoff failed. PCI: Device 0004:01:01.0 not available because of resource collisions pci 0004:01:01.0: Driver ohci_hcd requests probe deferral PCI: Device 0004:01:02.0 not available because of resource collisions pci 0004:01:02.0: Can't enable PCI device, BIOS handoff failed. PCI: Device 0004:01:02.0 not available because of resource collisions pci 0004:01:02.0: Driver ehci-pci requests probe deferral pci 0004:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff] pci 0004:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff] asoc-simple-card sound.6: ak4642-hifi <-> ec500000.rcar_sound mapping ok PCI: enabling device 0003:00:01.0 (0140 -> 0142) ohci_hcd 0003:00:01.0: OHCI Host Controller ohci_hcd 0003:00:01.0: new USB bus registered, assigned bus number 1 ohci_hcd 0003:00:01.0: irq 140, io mem 0xee080000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected PCI: enabling device 0003:00:02.0 (0140 -> 0142) ehci-pci 0003:00:02.0: EHCI Host Controller ehci-pci 0003:00:02.0: new USB bus registered, assigned bus number 2 ehci-pci 0003:00:02.0: irq 140, io mem 0xee081000 ehci-pci 0003:00:02.0: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected PCI: enabling device 0004:01:01.0 (0140 -> 0142) ohci_hcd 0004:01:01.0: OHCI Host Controller ohci_hcd 0004:01:01.0: new USB bus registered, assigned bus number 3 ohci_hcd 0004:01:01.0: irq 145, io mem 0xee0c0000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected PCI: enabling device 0004:01:02.0 (0140 -> 0142) ehci-pci 0004:01:02.0: EHCI Host Controller ehci-pci 0004:01:02.0: new USB bus registered, assigned bus number 4 ehci-pci 0004:01:02.0: irq 145, io mem 0xee0c1000 ehci-pci 0004:01:02.0: USB 2.0 started, EHCI 1.00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected /home/steve/genivi/genivi-9/porter/genivi-demo-platform/gdp-src-build/tmp/work-shared/porter/kernel-source/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ALSA device list: #0: rsnd-dai.0-ak4642-hifi Waiting 3sec before mounting root device... usb 4-1: new high-speed USB device number 2 using ehci-pci hub 4-1:1.0: USB hub found hub 4-1:1.0: 4 ports detected usb 4-1.2: new full-speed USB device number 3 using ehci-pci input: ILITEK ILITEK Multi-Touch as /devices/platform/pci-rcar-gen2.1/pci0004:01/0004:01:02.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input0 hid-multitouch 0003:222A:001C.0001: input: USB HID v1.10 Device [ILITEK ILITEK Multi-Touch] on usb-0004:01:02.0-1.2/input0 usb 4-1.3: new low-speed USB device number 4 using ehci-pci input: USB Keyboard as /devices/platform/pci-rcar-gen2.1/pci0004:01/0004:01:02.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input1 hid-generic 0003:04D9:1702.0002: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0004:01:02.0-1.3/input0 input: USB Keyboard as /devices/platform/pci-rcar-gen2.1/pci0004:01/0004:01:02.0/usb4/4-1/4-1.3/4-1.3:1.1/input/input2 hid-generic 0003:04D9:1702.0003: input: USB HID v1.10 Device [ USB Keyboard] on usb-0004:01:02.0-1.3/input1 usb 4-1.4: new low-speed USB device number 5 using ehci-pci input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/platform/pci-rcar-gen2.1/pci0004:01/0004:01:02.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input3 hid-generic 0003:045E:007D.0004: input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0004:01:02.0-1.4/input0 kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:1. devtmpfs: mounted Freeing unused kernel memory: 232K (c064a000 - c0684000) systemd[1]: Failed to insert module 'autofs4' systemd[1]: Failed to insert module 'ipv6' systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) systemd[1]: Detected architecture arm. Welcome to Yocto GENIVI Baseline (Poky/meta-ivi) 9.0.1 (kronos)! systemd[1]: Set hostname to . systemd-sysv-generator[130]: Overwriting existing symlink /run/systemd/generator.late/fuse.service with real service systemd-sysv-generator[130]: Overwriting existing symlink /run/systemd/generator.late/rc.pvr.service with real service systemd[1]: Started Dispatch Password Requests to Console Directory Watch. systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. systemd[1]: Started Forward Password Requests to Wall Directory Watch. systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. systemd[1]: Reached target Paths. systemd[1]: Starting Paths. [ OK ] Reached target Swap. systemd[1]: Reached target Swap. systemd[1]: Starting Swap. [ OK ] Created slice Root Slice. systemd[1]: Created slice Root Slice. systemd[1]: Starting Root Slice. [ OK ] Listening on Journal Socket. systemd[1]: Listening on Journal Socket. systemd[1]: Starting Journal Socket. [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Listening on Journal Socket (/dev/log). systemd[1]: Starting Journal Socket (/dev/log). [ OK ] Listening on udev Control Socket. systemd[1]: Listening on udev Control Socket. systemd[1]: Starting udev Control Socket. [ OK ] Created slice User and Session Slice. systemd[1]: Created slice User and Session Slice. systemd[1]: Starting User and Session Slice. [ OK ] Listening on Delayed Shutdown Socket. systemd[1]: Listening on Delayed Shutdown Socket. systemd[1]: Starting Delayed Shutdown Socket. [ OK ] Created slice System Slice. systemd[1]: Created slice System Slice. systemd[1]: Starting System Slice. systemd[1]: Mounted Debug File System. [ OK ] Reached target Slices. systemd[1]: Reached target Slices. systemd[1]: Starting Slices. [ OK ] Created slice system-getty.slice. systemd[1]: Created slice system-getty.slice. systemd[1]: Starting system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. systemd[1]: Created slice system-serial\x2dgetty.slice. systemd[1]: Starting system-serial\x2dgetty.slice. systemd[1]: Mounted Huge Pages File System. systemd[1]: Started Load Kernel Modules. systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... systemd[1]: Mounted FUSE Control File System. systemd[1]: Started File System Check on Root Device. systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ OK ] Listening on udev Kernel Socket. systemd[1]: Listening on udev Kernel Socket. systemd[1]: Starting udev Kernel Socket. systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... systemd[1]: Listening on Journal Audit Socket. systemd[1]: Starting Journal Service... Starting Journal Service... systemd[1]: Mounted POSIX Message Queue File System. systemd[1]: Mounted Configuration File System. systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ OK ] Mounted Temporary Directory. systemd[1]: Mounted Temporary Directory. [ OK ] Started Journal Service. systemd[1]: Started Journal Service. [ OK ] Started Apply Kernel Variables. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create Static Device Nodes in /dev. systemd-journald[150]: Received request to flush runtime journal from PID 1 Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. a Starting Create Volatile Files and Directories... dv7180 2-0020: Not detect any video input signal [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. [ OK ] Found device /dev/ttySC6. [ OK ] Reached target Sound Card. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Network Time Synchronization. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Timers. Starting Restore Sound Card State... [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets. [ OK ] Reached target System Time Synchronized. [ OK ] Started Restore Sound Card State. [ OK ] Listening on sshd.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started GENIVI DLT logging daemon. Starting GENIVI DLT logging daemon... [ OK ] Started GENIVI DLT system. Applicat...em information, logs and files.. Starting GENIVI DLT system. Applica... information, logs and files.... Starting Login Service... Starting Automotive Message Broker... [ OK ] Started D-Bus System Message Bus. Starting D-Bus System Message Bus... [ OK ] Started pulseaudio server. Starting pulseaudio server... Starting (null)... Starting Telephony service... Starting Connection service... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started A userspace daemon that run... under the eCryptfs mount point. Starting A userspace daemon that ru...nder the eCryptfs mount point... [ OK ] Started Automotive Message Broker. [ OK ] Started Telephony service. [ OK ] Started Avahi mDNS/DNS-SD Stack. PVR_K: SGX use system memory. pvrsrvkm: Power-on latency exceeded, new value 169100 ns pvrsrvkm pvrsrvkm: start latency exceeded, new value 8100 ns pvrsrvkm pvrsrvkm: state restore latency exceeded, new value 1900 ns [ OK ] Started Login Service. Starting Bluetooth service... [ OK ] Started Connection service. [ OK ] Reached target Remote File Systems. Starting Permit User Sessions... [ OK ] Started Bluetooth service. PVR_K: UM DDK-(3497023) and KM DDK-(3497023) match. [ OK ] Starting Hostname Service... [ OK ] Started Permit User Sessions. sh-eth ee700000.ethernet eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI [FAILED] Failed to start Hostname Service. dc_linuxfb - Found usable fbdev device (): range (physical) = 0x57100000-0x57a00000 size (bytes) = 0x900000 xres x yres = 1024x768 xres x yres (v) = 1024x2304 img pix fmt = 20 num buffers = 3 See "systemctl status systemd-hostnamed.service" for details. [ OK ] Started (null). Starting WPA supplicant... [ OK ] Started Weston reference Wayland compositor. Starting Weston reference Wayland compositor... [ OK ] Started Getty on tty1. Starting Getty on tty1... [ OK ] Started Serial Getty on ttySC6. Starting Serial Getty on ttySC6... [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started WPA supplicant. [ OK ] Started Update UTMP about System Runlevel Changes. [ OK ] Created slice user-0.slice. Starting User Manager for UID 0... [ OK ] Started User Manager for UID 0. Yocto GENIVI Baseline (Poky/meta-ivi) 9.0.1 porter ttySC6 porter login: root Password: Last login: Thu Mar 10 19:28:04 UTC 2016 on tty2 root@porter:~# /usr/bin/evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: ILITEK ILITEK Multi-Touch /dev/input/event1: USB Keyboard /dev/input/event2: USB Keyboard /dev/input/event3: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 Select the device event number [0-3]: 0 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x222a product 0x1c version 0x110 Input device name: "ILITEK ILITEK Multi-Touch" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 330 (BTN_TOUCH) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 0 Min 0 Max 7552 Resolution 17 Event code 1 (ABS_Y) Value 0 Min 0 Max 4224 Resolution 18 Event code 47 (ABS_MT_SLOT) Value 0 Min 0 Max 9 Event code 53 (ABS_MT_POSITION_X) Value 0 Min 0 Max 7552 Resolution 17 Event code 54 (ABS_MT_POSITION_Y) Value 0 Min 0 Max 4224 Resolution 18 Event code 57 (ABS_MT_TRACKING_ID) Value 0 Min 0 Max 65535 Properties: Property type 1 (INPUT_PROP_DIRECT) Testing ... (interrupt to exit) >> SL: Touched an option from main menu Event: time 1457638595.039165, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value 0 Event: time 1457638595.039165, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 5968 Event: time 1457638595.039165, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1649 Event: time 1457638595.039165, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 1 Event: time 1457638595.039165, type 3 (EV_ABS), code 0 (ABS_X), value 5968 Event: time 1457638595.039165, type 3 (EV_ABS), code 1 (ABS_Y), value 1649 Event: time 1457638595.039165, -------------- SYN_REPORT ------------ Event: time 1457638595.078133, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 6004 Event: time 1457638595.078133, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1654 Event: time 1457638595.078133, type 3 (EV_ABS), code 0 (ABS_X), value 6004 Event: time 1457638595.078133, type 3 (EV_ABS), code 1 (ABS_Y), value 1654 Event: time 1457638595.078133, -------------- SYN_REPORT ------------ Event: time 1457638595.088147, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value -1 Event: time 1457638595.088147, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 0 >> SL: Touched an option from main menu Event: time 1457638595.088147, -------------- SYN_REPORT ------------ Event: time 1457638616.144993, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value 1 Event: time 1457638616.144993, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 1705 Event: time 1457638616.144993, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1776 Event: time 1457638616.144993, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 1 Event: time 1457638616.144993, type 3 (EV_ABS), code 0 (ABS_X), value 1705 Event: time 1457638616.144993, type 3 (EV_ABS), code 1 (ABS_Y), value 1776 Event: time 1457638616.144993, -------------- SYN_REPORT ------------ Event: time 1457638616.173976, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 1754 Event: time 1457638616.173976, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1813 Event: time 1457638616.173976, type 3 (EV_ABS), code 0 (ABS_X), value 1754 Event: time 1457638616.173976, type 3 (EV_ABS), code 1 (ABS_Y), value 1813 Event: time 1457638616.173976, -------------- SYN_REPORT ------------ Event: time 1457638616.183983, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value -1 Event: time 1457638616.183983, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 0 Event: time 1457638616.183983, -------------- SYN_REPORT ------------ >> SL: Touched an option from main menu Event: time 1457638633.267876, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value 2 Event: time 1457638633.267876, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 5585 Event: time 1457638633.267876, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1644 Event: time 1457638633.267876, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 1 Event: time 1457638633.267876, type 3 (EV_ABS), code 0 (ABS_X), value 5585 Event: time 1457638633.267876, type 3 (EV_ABS), code 1 (ABS_Y), value 1644 Event: time 1457638633.267876, -------------- SYN_REPORT ------------ Event: time 1457638633.325887, type 3 (EV_ABS), code 53 (ABS_MT_POSITION_X), value 5632 Event: time 1457638633.325887, type 3 (EV_ABS), code 54 (ABS_MT_POSITION_Y), value 1627 Event: time 1457638633.325887, type 3 (EV_ABS), code 0 (ABS_X), value 5632 Event: time 1457638633.325887, type 3 (EV_ABS), code 1 (ABS_Y), value 1627 Event: time 1457638633.325887, -------------- SYN_REPORT ------------ Event: time 1457638633.335857, type 3 (EV_ABS), code 57 (ABS_MT_TRACKING_ID), value -1 Event: time 1457638633.335857, type 1 (EV_KEY), code 330 (BTN_TOUCH), value 0 Event: time 1457638633.335857, -------------- SYN_REPORT ------------ ^[ ^Croot@porter:~# /usr/bin/evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: ILITEK ILITEK Multi-Touch /dev/input/event1: USB Keyboard /dev/input/event2: USB Keyboard /dev/input/event3: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 Select the device event number [0-3]: 3 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x45e product 0x7d version 0x110 Input device name: "Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 272 (BTN_LEFT) Event code 273 (BTN_RIGHT) Event code 274 (BTN_MIDDLE) Event type 2 (EV_REL) Event code 0 (REL_X) Event code 1 (REL_Y) Event code 8 (REL_WHEEL) Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Properties: Testing ... (interrupt to exit) >> SL: Touched an option from main menu. No output from evtest ^Croot@porter:~# root@porter:~# /usr/bin/evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: ILITEK ILITEK Multi-Touch /dev/input/event1: USB Keyboard /dev/input/event2: USB Keyboard /dev/input/event3: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 Select the device event number [0-3]: 2 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x4d9 product 0x1702 version 0x110 Input device name: " USB Keyboard" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 113 (KEY_MUTE) Event code 114 (KEY_VOLUMEDOWN) Event code 115 (KEY_VOLUMEUP) Event code 116 (KEY_POWER) Event code 128 (KEY_STOP) Event code 140 (KEY_CALC) Event code 142 (KEY_SLEEP) Event code 143 (KEY_WAKEUP) Event code 144 (KEY_FILE) Event code 150 (KEY_WWW) Event code 152 (KEY_SCREENLOCK) Event code 155 (KEY_MAIL) Event code 156 (KEY_BOOKMARKS) Event code 158 (KEY_BACK) Event code 159 (KEY_FORWARD) Event code 161 (KEY_EJECTCD) Event code 163 (KEY_NEXTSONG) Event code 164 (KEY_PLAYPAUSE) Event code 165 (KEY_PREVIOUSSONG) Event code 166 (KEY_STOPCD) Event code 167 (KEY_RECORD) Event code 168 (KEY_REWIND) Event code 171 (KEY_CONFIG) Event code 172 (KEY_HOMEPAGE) Event code 173 (KEY_REFRESH) Event code 217 (KEY_SEARCH) Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Properties: Testing ... (interrupt to exit) >> SL: Touched an option from main menu. No output from evtest ^Croot@porter:~# /usr/bin/evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: ILITEK ILITEK Multi-Touch /dev/input/event1: USB Keyboard /dev/input/event2: USB Keyboard /dev/input/event3: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 Select the device event number [0-3]: 1 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x4d9 product 0x1702 version 0x110 Input device name: " USB Keyboard" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 1 (KEY_ESC) Event code 2 (KEY_1) Event code 3 (KEY_2) Event code 4 (KEY_3) Event code 5 (KEY_4) Event code 6 (KEY_5) Event code 7 (KEY_6) Event code 8 (KEY_7) Event code 9 (KEY_8) Event code 10 (KEY_9) Event code 11 (KEY_0) Event code 12 (KEY_MINUS) Event code 13 (KEY_EQUAL) Event code 14 (KEY_BACKSPACE) Event code 15 (KEY_TAB) Event code 16 (KEY_Q) Event code 17 (KEY_W) Event code 18 (KEY_E) Event code 19 (KEY_R) Event code 20 (KEY_T) Event code 21 (KEY_Y) Event code 22 (KEY_U) Event code 23 (KEY_I) Event code 24 (KEY_O) Event code 25 (KEY_P) Event code 26 (KEY_LEFTBRACE) Event code 27 (KEY_RIGHTBRACE) Event code 28 (KEY_ENTER) Event code 29 (KEY_LEFTCTRL) Event code 30 (KEY_A) Event code 31 (KEY_S) Event code 32 (KEY_D) Event code 33 (KEY_F) Event code 34 (KEY_G) Event code 35 (KEY_H) Event code 36 (KEY_J) Event code 37 (KEY_K) Event code 38 (KEY_L) Event code 39 (KEY_SEMICOLON) Event code 40 (KEY_APOSTROPHE) Event code 41 (KEY_GRAVE) Event code 42 (KEY_LEFTSHIFT) Event code 43 (KEY_BACKSLASH) Event code 44 (KEY_Z) Event code 45 (KEY_X) Event code 46 (KEY_C) Event code 47 (KEY_V) Event code 48 (KEY_B) Event code 49 (KEY_N) Event code 50 (KEY_M) Event code 51 (KEY_COMMA) Event code 52 (KEY_DOT) Event code 53 (KEY_SLASH) Event code 54 (KEY_RIGHTSHIFT) Event code 55 (KEY_KPASTERISK) Event code 56 (KEY_LEFTALT) Event code 57 (KEY_SPACE) Event code 58 (KEY_CAPSLOCK) Event code 59 (KEY_F1) Event code 60 (KEY_F2) Event code 61 (KEY_F3) Event code 62 (KEY_F4) Event code 63 (KEY_F5) Event code 64 (KEY_F6) Event code 65 (KEY_F7) Event code 66 (KEY_F8) Event code 67 (KEY_F9) Event code 68 (KEY_F10) Event code 69 (KEY_NUMLOCK) Event code 70 (KEY_SCROLLLOCK) Event code 71 (KEY_KP7) Event code 72 (KEY_KP8) Event code 73 (KEY_KP9) Event code 74 (KEY_KPMINUS) Event code 75 (KEY_KP4) Event code 76 (KEY_KP5) Event code 77 (KEY_KP6) Event code 78 (KEY_KPPLUS) Event code 79 (KEY_KP1) Event code 80 (KEY_KP2) Event code 81 (KEY_KP3) Event code 82 (KEY_KP0) Event code 83 (KEY_KPDOT) Event code 86 (KEY_102ND) Event code 87 (KEY_F11) Event code 88 (KEY_F12) Event code 89 (KEY_RO) Event code 92 (KEY_HENKAN) Event code 93 (KEY_KATAKANAHIRAGANA) Event code 94 (KEY_MUHENKAN) Event code 95 (KEY_KPJPCOMMA) Event code 96 (KEY_KPENTER) Event code 97 (KEY_RIGHTCTRL) Event code 98 (KEY_KPSLASH) Event code 99 (KEY_SYSRQ) Event code 100 (KEY_RIGHTALT) Event code 102 (KEY_HOME) Event code 103 (KEY_UP) Event code 104 (KEY_PAGEUP) Event code 105 (KEY_LEFT) Event code 106 (KEY_RIGHT) Event code 107 (KEY_END) Event code 108 (KEY_DOWN) Event code 109 (KEY_PAGEDOWN) Event code 110 (KEY_INSERT) Event code 111 (KEY_DELETE) Event code 113 (KEY_MUTE) Event code 114 (KEY_VOLUMEDOWN) Event code 115 (KEY_VOLUMEUP) Event code 116 (KEY_POWER) Event code 117 (KEY_KPEQUAL) Event code 119 (KEY_PAUSE) Event code 121 (KEY_KPCOMMA) Event code 122 (KEY_HANGUEL) Event code 123 (KEY_HANJA) Event code 124 (KEY_YEN) Event code 125 (KEY_LEFTMETA) Event code 126 (KEY_RIGHTMETA) Event code 127 (KEY_COMPOSE) Event code 128 (KEY_STOP) Event code 129 (KEY_AGAIN) Event code 130 (KEY_PROPS) Event code 131 (KEY_UNDO) Event code 132 (KEY_FRONT) Event code 133 (KEY_COPY) Event code 134 (KEY_OPEN) Event code 135 (KEY_PASTE) Event code 136 (KEY_FIND) Event code 137 (KEY_CUT) Event code 138 (KEY_HELP) Event code 183 (KEY_F13) Event code 184 (KEY_F14) Event code 185 (KEY_F15) Event code 186 (KEY_F16) Event code 187 (KEY_F17) Event code 188 (KEY_F18) Event code 189 (KEY_F19) Event code 190 (KEY_F20) Event code 191 (KEY_F21) Event code 192 (KEY_F22) Event code 193 (KEY_F23) Event code 194 (KEY_F24) Event code 240 (KEY_UNKNOWN) Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Event type 17 (EV_LED) Event code 0 (LED_NUML) Event code 1 (LED_CAPSL) Event code 2 (LED_SCROLLL) Key repeat handling: Repeat type 20 (EV_REP) Repeat code 0 (REP_DELAY) Value 250 Repeat code 1 (REP_PERIOD) Value 33 Properties: Testing ... (interrupt to exit) ^Croot@porter:~# >> SL: Touched an option from main menu. No output from evtest